 |
 |
 |
|
| |
 |
|
 |
|
|
| |
V-Belts
|
|
|
|
|
|
|
CLASSICAL DESIGN
RAW EDGE, MOULDED NOTCH V-BELT OF CONVENTIONAL CROSS-SECTION
Next to the Hi-Power® wrapped V-belt of conventional
cross-section, Gates markets the Hi-Power® Moulded Notch
V-belt construction. This Hi-Power® MN V-belt is built
for excellent performance on heavy-duty industrial drives.
Technolgically, it is a first-class product, combining a raw
edge construction with classical section V-belt advantages.
The raw edge construction makes the Hi-Power® MN replacement
belt especially suited for drives requiring small diameter
pulleys and back idlers. The extensive size range covers numerous
heavy-duty applications on industrial pumps, compressors,
machine tools, etc.
More
Detail >>
Section & Nominal Dimensions >>
Specifications table >> |
| |
| ^ Back to top |
|
|
|
|
WEDGE DESIGN
RAW EDGE, MOULDED NOTCH, NARROW SECTION
V-BELT
Next to the Super HC®
wrapped, narrow section V-belt, Gates markets the Super HC®
Moulded Notch V-belts construction. Super HC® MN V-belts
put more power where high speeds, high speed ratios or small
pulley diameters are required, thus offering significant advantages
over classical section V-belts.
Developed through specialised
research, Super HC® MN is highly recommended for use on
all industrial heavy-duty, narrow section V-belts drives.
The
Super HC® MN increased transmission efficiency allows more
compact and highly economical drive design.
More
Detail >>
Section & Nominal Dimensions >>
Specifications table >> |
| |
| ^ Back to top |
|
|
|
|
MULTIPLE V-BELTS
Gates PowerBand® offers
a solution for drives where single belts vibrate, turn over
or jump off the pulleys. PowerBand® is especially developed
for drives subjected to pulsating loads. It consists of several
V-belts joined together by a permanent, high strength tie band,
thus being tougher than all the belts taken separately.
PowerBand®
is available in SPB, SPC, 8V/25J, 9J, 15J, 3VX and 5VX sections.
B,Cand D sectiopn are available on request.
More
Detail >>
Section & Nominal Dimensions >>
Specifications table >> |
| |
| ^ Back to top |
|
|
|
|
MULTI-RIB BELT
Thanks to its truncated rib design, Gates Micro-V®
multi-rib ensures an outstanding performance at
higher speeds on smaller diameter pulleys.
This long-lasting belt realises a power capacity gain
up to 80% higher than RMA standards while still
guaranteeing smooth running.
Identification:
| Durable yellow marking indicating type and
dimension. |
Construction:
* Truncated ribs ensure flexibility, reduce heat buildup and improve rib crack resistance.
* High modulus, low stretch polyester tensile member provides superior resistance to fatigue and shock loads.
* All polychloroprene rubber compound provides oil and heat resistance.
* Static conductive undercord (ISO 1813) ensures safe operation.
* Specially formulated fibre reinforced undercord
stock improves belt stability.
* Woven fabric rib surface ensures better wear
resistance, quiet running and provides a
clutching surface ("PL" and "PM" section). |
More
Detail >>
Section & Nominal Dimensions >>
Specifications table >> |
| |
| ^ Back to top |
|
|
|
|
POLYURETHANE V-BELTS
This compact and strong
belt with nominal top width from 3mm to 11mm transmits more
power and allows high speed ratios. Polyflex® is suited for
extremely small diameter pulleys and very compact drives with
high rotational speeds.
Ideal for use on machines and machine tools requiring high
performance and smooth operation in limited space such as
bench type milling machines, lathe drives, woodworking and
metalworking machine spindle drives, computer peripheral equipment,
small blowers, etc.
More
Detail >>
Section & Nominal Dimensions >>
Specifications table >> |
| |
| ^ Back to top |
|
|
|
|
LIGHT DUTY V-BELT
Truflex® gives optimum service on fractional power
V-belt drives including back idler applications.
The lower cord positioning improves t3 e performance on light-duty belt drives.
Truflex® is
recommended for applications such as powered
cultivators, lawn mowers, electrical household
appliances and airconditioning equipment.
Identification:
| Durable moulded label indicating size and type. |
Construction:
* Thanks to its special thin profile, this belt is
recommended for small diameter drives.
* Low cord positioning makes this belt appropriate for back idler applications.
* Flex-Weavee cover.
* Flex-bonded tensile member.
* Polychloroprene compound.
* Non self-igniting. The belt will not catch fire from
heat buildup, even with severe slippage.
* Static conductive (IS0 1813). |
Advantages:
* Extremely flexible.
* Smooth, quiet operation.
* Economical drives.
* Superior length stability. |
More
Detail >>
Section & Nominal Dimensions >>
Specifications table >> |
| |
| ^ Back to top |
|
|
|
|
V-BELTS FOR VARIABLE SPEED DRIVES
Gates Multi-Speed
belt provides top performance on variable speed drives. It
adjusts itself to the pulley groove without difficulty, providing
a wide range of speeds and speed ratios.
In addition to the standard Multi-Speed belt line, special
sizes (top width, thickness and angle) are available on request.
More
Detail >>
Specifications table >> |
| |
| ^ Back to top |
|
|
|
| |
|
|
|
|
)
)
)
)
)
)
)
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}